• LocationCroydon, South West London, Sydenham Road, CR0 2EL**
  • Our Working HoursOpening times: 24 hours a day*
  • Phone Us!Free phone: 0800 051 8637

Free Phone : 0800 051 8637

We Can Help Today!

Express Croydon glaziers replace glass for a variety of reasons. we provide an emergency response service for broken glass repairs where we would board the windows for your security and then replace the glass usually within 48 hours in and around the Croydon area.

Glass in Croydon commercial properties that should be but doesnt meet safety requirements can be replaced with safety glass. All enquiries are welcome with free estimates and quotes by phoning our Croydon team.

Glass for use in Croydon domestic properties typically comes in two varieties; single or double-glazed, with a choice of either float/annealed or toughened glass. Single-glazed windows with float glass can normally be fitted on the same day. Our Croydon glaziers are able to replace glass from either the outside or the inside of properties, if the framework allows it. If required, we can source scaffolding and/or lifting vehicles for high glass installations.

Contact us

Croydon Glazing Testimonials

Customer Name: Brian Denton.
It gives me great pleasure to write this letter to express our gratitude to the engineer who visited our house on 2nd September. My wife said that Mr. Bradley was very helpful, explained what he had done and advised her how to avoid the problems in the future.  At a time when no one seems to have any pride in their work, it is a pleasure to be able to write and thank someone who has. Well done Mr. Bradley and thank you for the service.

Want to speak to an expert?
Call: 0800 051 8637

Example Of Our Glass Services

Cat & Dog Flaps
Given a sufficiently large pane of glass, we can manufacture and install a pane of glass, with a hole pre-cut for the flap. We cannot work on existing toughened glass (due to the high tension in the glass), any pressure applied to the glass would cause the destruction of the glass. It is possible to cut normal glass in situ, but as this is at the owner's own risk, it is not recommended. There must be a minimum clearance of 150mm between the edge of the glass, and the edge of the hole of the flap, so the glass is able to go through the toughening process and remain intact.

Book one of our experts, today

Click To Get a Free Quote

Calls made will not be charged

Top